|
O.A. WIDTH: |
96” OR 102” OUTSIDE |
|
MAIN FRAME: |
ROLLED HI TENSILE 6” CHANNEL SIDE RAILS WITH FRONT AND
REAR SILLS. |
|
CROSSMEMBERS: |
4”
HI TENSILE ON 12” CENTERS |
|
FLOOR: |
19W2 BAR GRATING STEEL, 1” X 3/16” OPENING OR ¼”
STEEL DIAMOND TREAD PLATE. |
|
UPRIGHTS/RAILS: |
SIDE POSTS 3/16” HI TENSILE STEEL. TAPERED POST
DESIGN WELDED TO 5 X 3 X ¼” ANGLE, ANGLE WELDED TO SIDE RAIL AND FLUSH WITH
FLOOR PLATE. TOP RAIL 2 X 2 X ¼” ANGLE. ANGLE LAID OVER AND WELDED TO
UPRIGHTS. CROSSBAR RAIL 12” FROM TOP RAIL 2 X 2 X ¼”. ANGLE WELDED TO EACH
POST. TOP, MIDDLE, AND LOWER RAILS WILL HAVE CHAIN STOPS WELDED TO BOTTOM OF 2
X 2 ANGLE EVERY 8”, 12”, 24”, AND 36” HEIGHT LOCATIONS FROM FLOOR. LOCATIONS
CAN BE MODIFIED TO MEET INDIVIDUAL SPECIFICATIONS. |
|
BULKHEADS: |
3 FT. HIGH, SAME CONSTRUCTION AS SIDE RAILS AND
POSTS, COVERED WITH “9-11 FLATTENED EXPANDED METAL X ¾”. TWO WOOD STRIPS WILL
BE USED TO PREVENT EXPANDED METAL NOT TO COME IN CONTACT WITH CYLINDERS. CHAIN
STOP RAILS WILL BE LOCATED AT SAME HEIGHT LOCATIONS AS SIDES. |
|
LIFTGATES: |
ALL
MAJOR LIFTGATES AVAILABLE FOR INSTALLATION. |
|
ELECTRICAL: |
12 VOLT SYSTEM. TRUCKLITE SEALED HARNESS SYSTEM
WITH VAPOR PROOF LIGHTS, SERIES 88. LED LIGHT AVAILABLE AS OPTION. |
|
BUMPER: |
HEAVY DUTY I.C.C. STEP BUMPER GUARD. |
|
PAINT: |
PRIMED WITH EPOXY PRIMER, FINISH COATED WITH
POLYURETHANE PAINT, COLOR OF CUSTOMERS PREFERENCE. |
|
TAPE: |
MGM REFLECTIVE CONSPICUITY TAPE 2” INSTALLED ON BODY
PERIMETER. |
|
SPLASH GUARDS: |
OPTIONAL WITH BAR GRATING FLOOR: FORMED SPLASH GUARD
FENDERS INSTALLED UNDER WHEEL AREAS. |
